Here is a short DIY guide on how to fix your broken window pane by yourself and save some money in this period of recession

Step One

Spread a sheet on the ground either side of the window and carefully remove the remaining glass from the frame using protective gloves and glasses.

Step Two

Cut away the old putty and also remove old retaining sprigs, taking care not to damage the frame in the process. Clean down the frame and then paint with a coat of primer (wood or metal) to prepare the surface for the new pane.

Step Three

Measure the height and width of the window opening, deducting at least 4mm from each measurement to allow the glass to sit easily in the frame. Get the glass cut for you at a professional glass merchants or DIY store, to ensure the best fit. You can also buy all of the sprigs and putty you will need here to fit the window in as well.

Step Four

Feed the putty into the frame rebate and place the glass in, bottom edge first. Lightly press the pane into the putty and then fix back into the frame with the sprigs. Finish off by feeding putty around the perimeter of the frame, and then remove any excess.

Related Tags

, remove metal frame window, how to fix a broken window guide, fix broken window pane, how to fix a broken window pane, broken window pane, fixing a broken window pane, how to fix window panes, how to replace a broken window pane in a metal window, how to replace a broken window pane metal frame, how to mend a broken window, how to replace broken window in metal frame, how to replace broken window pane in a metal frame, how to fix window pane, how to replace a broken window pane with a metal frame, repair broken metal frame window, replace broken metal window pane, window sprigs putty, window panes sprigs, window pane metal frame